DEPLOYMENT GUIDE RSS

Splitting one wire into multiple wires can be done in many ways, this video shows how to splice wires using an open barrel splice. Common applications are sensor ground wires & 5 volt reference branching out to multiple sensors, 12v power branching to injectors as well as many others. You can find open barrel splices here: https://mavenspeed.com/collections/b2...  IN THIS VIDEO: 1: Overview of open barrel splices 0:37 2: Select splice using selection Chart 1:38 3: Strip wires to correct length 3:25 4: Crimping tool 4:35 5: Splicing 1 wire into 2 5:30 6: Bonus Trick 9:37  

Read more

    A quick video on how to install our billet 2pc window bezels- NO NUTS REQUIRED! Product is available on our website https://mavenspeed.com/collections/wi...

Read more

  This 4ga DTHD connector can be fastened to a firewall or trunk to allow you to pass a 4ga cable through in a way that can easily be removed. Here is a link to Devin Vanderhoof’s video that was referenced in this video: https://youtu.be/BQdQBesuJCs?t=60 Here is a link to the product page: https://mavenspeed.com/collections/b2... IN THIS VIDEO: 1: Overview, seals 0:09 2: Template/Cutting holes 0:41 3: Terminals; Pins and Sockets 1:45 4: Crimping Terminals 3:19 5: Assembly 6:18 6: Pin Removal 8:00

Read more

CONNECTOR BULKHEAD, TUTORIAL, WIRING -

All of your hard work in making a nice wiring harness can quickly become a frustration when you have to service your wiring harness or engine and realize the harness has been passed through the firewall and terminated leaving the harness stuck half on the engine side of the project and half on the interior side of the project with no way to remove the harness without cutting it apart. With a connector bulkhead you can remove the harness from the firewall with a quarter turn of the connector and remove the engine without taking off every sensor, injector, coil connectors etc,...

Read more